How I put on a new set of round wound strings on a solid body ubass

Stringing Guide 1. Remove all the old strings 2. Make sure to tape down the bridge saddle so it doesn’t move 3. Remove string back plate (if you have one) 4. Start with unpacking the E (lowest) string (and next time around the A and so on…) 5. Check and see if any metal washersFortsätt läsa ”How I put on a new set of round wound strings on a solid body ubass”

Betygsätt detta:

DIY Update! BUILD YOUR OWN SOLID BODY UBASS – ALL YOU NEED TO KNOW | PHASE 2 – BODY SETUP 2

Hi, Finally video 3 (of 4) is done! Phase 2 | Body setup 2 It’s time to install the pre-amp/EQ, bridge, back plate and volume/tone knobs. All the steps are shown in the video. You can also download a PDF guide here! Best of luck and stay tuned for the last part in the BuildFortsätt läsa ”DIY Update! BUILD YOUR OWN SOLID BODY UBASS – ALL YOU NEED TO KNOW | PHASE 2 – BODY SETUP 2”

Betygsätt detta:

Build your own solid body Ubass – all you need to know | Phase 2 – Body Setup 1

Hi, It’s time for Phase 2! It will focus on the setup of the body and first up is strap buttons and thumb wheels for the bridge. The PDF instructions I compiled from info at kalabrand.com (no longer available) can be downloaded on this link: U-Bass Kit Assembly Instructions compiled by playubass-SMALL Next up: EQ/Pre-amp,Fortsätt läsa ”Build your own solid body Ubass – all you need to know | Phase 2 – Body Setup 1”

Betygsätt detta:

Build your own solid body Ubass – all you need to know | instructions and phase 1

Hi, I’m finally done with phase 1 of my ”Build your own ubass” series. In this series I will build a Kala Solid Body Ubass. All the parts are from the Kala web shop! In the first phase 1 worked with the finish of the body. As you might have seen on my instagram or facebookFortsätt läsa ”Build your own solid body Ubass – all you need to know | instructions and phase 1”

Betygsätt detta:

Kala Solid Body Ubass Kit | New DIY series at playubass.com

Hi, New year, new project, new Instagram…lets go! I have wanted to write about this for quite some time now. I got this kit last year and my plan was to start the project early August…this wasn’t possible because of my hand injury… But now I’m back on track and will get started with theFortsätt läsa ”Kala Solid Body Ubass Kit | New DIY series at playubass.com”

Betygsätt detta: