DIY Update! BUILD YOUR OWN SOLID BODY UBASS – ALL YOU NEED TO KNOW | PHASE 2 – BODY SETUP 2

Video 3.png

Hi,

Finally video 3 (of 4) is done!

Phase 2 | Body setup 2
It’s time to install the pre-amp/EQ, bridge, back plate and volume/tone knobs. All the steps are shown in the video. You can also download a PDF guide here!

Best of luck and stay tuned for the last part in the Build your own Kala Solid Body Ubass series. You can find the earlier posts here!

/Magnus

Build your own solid body Ubass – all you need to know | Phase 2 – Body Setup 1

DIY UBassKIT Video 2-upload-teaser

Hi,

It’s time for Phase 2!
It will focus on the setup of the body and first up is strap buttons and thumb wheels for the bridge.

The PDF instructions I compiled from info at kalabrand.com (no longer available) can be downloaded on this link: U-Bass Kit Assembly Instructions compiled by playubass-SMALL

Next up: EQ/Pre-amp, output jack, volume/tone knobs and back plate!

I have also done a video that shows you how to change the EQ/Pre-amp in a solid body ubass!

Read more about previous steps in this DIY project in posts that can be found on the DIY-page!

Until next tine: Have fun – play Music!

/Magnus

Build your own solid body Ubass – all you need to know | instructions and phase 1

ubass-finished body+neck
5-string fretless. Body finish done with neck in neck pocket

Hi,

I’m finally done with phase 1 of my ”Build your own ubass” series. In this series I will build a Kala Solid Body Ubass. All the parts are from the Kala web shop!

In the first phase 1 worked with the finish of the body. As you might have seen on my instagram or facebook page I wanted to get close to the finish of my Bakithi Kumalo signature solid body 4-string fretless. I’m quite happy with the result and learned a lot in the process!

All associated blog posts regarding this project will be accessible on the DIY page!

I will go into the details about the first phase, but first, let’s check what you need to build your own ubass.

Step 1 – Buy the parts
You need to decide what model you want to build. There are four options:

  • 4-string fretted
  • 4-string fretless
  • 5-string fretted
  • 5-string fretless (the one I’m putting together!)

When I got the parts to my UBass there was a kit option with all the parts included. This is not available anymore so you need to add all the parts yourself at the Kala Web Shop.

Here’s a PDF with all the info about what’s needed for a Solid Body fretless 5-string:
Build your own Solid Body Kala Ubass – parts needed

Step 2 – Decide on the body finish
I choose to mimic the look of my Bakithi Kumalo signature ubass and went for a so called ”tar” finish. I will not go into detail of the different products I used since these will differ from country to country. It is of course possible to do whatever you want with the body finish!

Please send me pictures of YOUR custom UBass finish so we can show them to the world! 🙂

Step 3 – Put the ubass together
I have compiled a guide from the instructions you could find on the previous version of the kalabrand.com web page.

Download my PDF instructions below:
U-Bass Kit Assembly Instructions compiled by playubass

I will guide you step by step – phase by phase through this process in my series of blog posts!

First up: Body finish!
This first phase is documented in the movie below!

Good luck with the making of your own solid body ubass!

/Magnus

New newsletter with lots of…news!

playubass-newsletter-logo

I’m just about to send out my next newsletter…the first one this year…

My goal was to keep these going in a more monthly or bi-monthly faschion. But time kind of rushes past too quickly…

Anyway if you don’t already subscribe now!

From the newsletter:
Education material for the Ubass
In this next issue of the newsletter I will finally let you try out a portion the educational material I’ve been working on for quite some time now.

These so called Lesson Packs is aiming towards different topics and since I haven’t been able to play with my right hand because of a hand injury (more in the newsletter) the first thing up is part of a lesson focusing on the hammer-on and pull-of techniques from a future Lesson Pack 3 ”Etudes and dexterity” lesson.

In the lesson you will be able to try out the interface. I will start by releasing these Lesson Packs in the iBooks format.
This format is available only via the AppStore/iBooksStore so iPhone, iPad and Mac users (Yosemite 10.10 and up) will be able to uses these.

To check ”the market” I have made a little survey trying to find out how many of you that have access to any of the above mentioned platforms. If demand is high, I might put time into transforming/developing versions of these lesson packs for other formats/platforms.

Please fill in this survey (will take 1-2 minutes tops!)

The first lesson pack to be released is Lesson Pack 1 ”Basic techniques”.
I’m still in the process of making the video portions of these lessons, and it takes a lot of time to get these right. Can’t yet let you know about an exact date for the release but my goal is the beginning of 2016.

NEW DIY Video! How to change the preamp in a solid body UBass

How to change the preamp in a Kala Solid Body Ubass

 

The second video in my DIY series is finally done!!! It sure took a while to get it done. Mainly because the lack of time.

This spring have been extremely busy. Besides my work as a music teacher and IT-pedagogy I have toured Sweden and just got back from a trip to Brazil…

Anyway, now it’s done! I hope it will be informative and could work as a guide if you want to perform this DIY!

If you have any questions please drop me a line at: ubasslessons@gmail.com

To help out even more please feel free to use this guide in PDF-format!

The next DIY video will be the first in a series of post. This is quite a big project in probably ten parts. More about this soon!

/Magnus