Build your own solid body Ubass – all you need to know | Phase 2 – Body Setup 1

DIY UBassKIT Video 2-upload-teaser

Hi,

It’s time for Phase 2!
It will focus on the setup of the body and first up is strap buttons and thumb wheels for the bridge.

The PDF instructions I compiled from info at kalabrand.com (no longer available) can be downloaded on this link: U-Bass Kit Assembly Instructions compiled by playubass-SMALL

Next up: EQ/Pre-amp, output jack, volume/tone knobs and back plate!

I have also done a video that shows you how to change the EQ/Pre-amp in a solid body ubass!

Read more about previous steps in this DIY project in posts that can be found on the DIY-page!

Until next tine: Have fun – play Music!

/Magnus

Annonser

NEW DIY Video! How to change the preamp in a solid body UBass

How to change the preamp in a Kala Solid Body Ubass

 

The second video in my DIY series is finally done!!! It sure took a while to get it done. Mainly because the lack of time.

This spring have been extremely busy. Besides my work as a music teacher and IT-pedagogy I have toured Sweden and just got back from a trip to Brazil…

Anyway, now it’s done! I hope it will be informative and could work as a guide if you want to perform this DIY!

If you have any questions please drop me a line at: ubasslessons@gmail.com

To help out even more please feel free to use this guide in PDF-format!

The next DIY video will be the first in a series of post. This is quite a big project in probably ten parts. More about this soon!

/Magnus